Skip to main content

A&U

A&U Contractors — Header

Home / Services / Siding Installation

Siding Installation & Repair in Staten Island, NYC Installed clean. Sealed right.

Searching for siding installers near me? A&U Contractors installs vinyl, fiber cement, composite wood and aluminum siding across Staten Island, Brooklyn, Queens, Manhattan and the Bronx — licensed, insured, and priced up front.

$500 OFF full siding jobs

Get your free estimate

Tell us about your home — we reply within one business day.

Please enable JavaScript in your browser to complete this form.
5Boroughs served
100%Licensed & insured
5.0★Google rated
$7–16Per sq ft installed
Licensed & InsuredCertified general contractor
Install · Repair · ReplaceFull-service siding
Free On-Site EstimateNo obligation, itemised
Mon–Sat 9–6(347) 833-5796

Siding contractors near me

Searching siding installers near me? Meet Staten Island's trusted siding contractors.

A&U Contractors has served Staten Island, NY as one of the area's best siding contractors for years, and we have a long record of happy clients to show for it. If you have been searching "siding installers near me," we would like you on that list too.

New siding gives the exterior of your Staten Island house the pop you have been looking for — but it does more than that. It tightens up energy efficiency, guards the structure against weather, and lifts your property value. Our crews handle every step, from material selection to the final seal.

You can trust our project managers, renovation experts, siding installers and customer service team to deliver high-quality work — whether you are remodeling an existing house or building new. We also promise the most current, premium siding products on the market.

What we handle on a siding job

  • New siding installation on residential & multi-family homes
  • Full siding replacement with tear-off and disposal
  • Siding repair — cracked, loose, warped or storm-damaged panels
  • Rotted sheathing replacement before new siding goes on
  • House wrap / weather-resistive barrier installation
  • Insulated siding for lower heating bills
  • Trim, soffit, fascia and corner post wrapping
  • Colour and profile matching for attached row houses

We aim to offer affordable siding solutions that meet market standards. For that we keep a committed team of specialists in the siding installation and repair department. Whether you need new vinyl siding installation in Queens, fiber cement on a Brooklyn row house, or repair to existing siding anywhere in NYC — we are here. Excellence is not a distance but a lifetime journey, so we work through every technical detail and keep the architecture of your block in view.

Fiber · Aluminum · Vinyl · Wood

Siding installation in the material that actually fits your home.

Your home is your asset, and the A&U team knows how to protect it. Plenty of siding materials are sold in NYC and each one has its own benefits — the right pick depends on your budget, your facade's sun exposure, your block's character, and how long you plan to stay.

Most popular

Vinyl Siding

Homeowners choose vinyl siding installation most often for its low maintenance, affordability, and huge range of colours and profiles.

  • Lifespan20–30 yrs
  • UpkeepRinse only
  • Best forBudget / rentals
Built to last

Fiber Cement Siding

An excellent option for owners securing a home long term, thanks to its tolerance and strength against harsh weather.

  • Lifespan40–50 yrs
  • UpkeepRepaint 10–15 yr
  • Best forSun-exposed facades
Classic look

Composite Wood Siding

Traditional and timeless. Beautiful and versatile in its natural state and easy to alter to your preferred style — but it needs repainting every few years and costs more than the alternatives.

  • Lifespan20–40 yrs
  • UpkeepPaint 3–7 yr
  • Best forCharacter homes
Low upkeep

Aluminum Siding

Lightweight and simple to install, and it resists rust and corrosion — a top choice for a long-lasting, low-maintenance exterior.

  • Lifespan30–40 yrs
  • UpkeepMinimal
  • Best forCoastal / windy sites

Other materials — stucco, engineered wood, insulated vinyl, cedar shake — are also available and used depending on conditions. Ask us during your estimate and we will tell you honestly which one suits your building.

2026 pricing

Siding installation cost in Brooklyn, Queens, Staten Island & Manhattan

Most NYC siding jobs land between $7 and $16 per square foot installed. For a typical 1,500 sq ft row house exterior that works out to roughly $10,500 – $24,000. NYC runs above the national average because of labour rates, scaffolding on attached homes, disposal fees and tight street access for deliveries.

Estimated installed cost by material — New York City, 2026
Siding materialCost / sq ft installed1,500 sq ft homeWhat you get
Vinyl$5 – $10$7,500 – $15,000Lowest entry cost, widest colour range, near-zero maintenance
Insulated vinyl$8 – $13$12,000 – $19,500Vinyl backed with rigid foam — warmer walls, quieter interior
Aluminum$6 – $11$9,000 – $16,500Rust-resistant, light, good on exposed and coastal sites
Fiber cement$9 – $16$13,500 – $24,000Longest life, holds colour and shape, fire resistant
Composite / wood$8 – $16$12,000 – $24,000Natural look, fully customisable, needs periodic refinishing
Add-on line items that change your final number
Line itemTypical NYC rangeWhen it applies
Old siding tear-off & disposal$1 – $3 / sq ftAlmost always, unless the existing layer is sound and flat
Sheathing replacement$3 – $7 / sq ftWhere boards or plywood behind the siding have rotted
House wrap / weather barrier$0.50 – $1 / sq ftEvery full replacement — required for code compliance
Trim, soffit & fascia wrapping$8 – $15 / linear ftWhere existing trim is damaged or you want a full match
Scaffolding / lift access$800 – $2,500Multi-storey attached row houses and tight side lots
DOB permit & filing$75 – $300+Material changes, structural work, landmarked districts
Asbestos-certified removal$6 – $12 / sq ftPre-1980 homes with suspected asbestos-cement siding

Why our pricing stays competitive

Getting professional work inside a budget is difficult — but not with us. At A&U you get construction expertise, skill, knowledge, creativity and commitment in one place. Our team streamlines the process to keep cost down without compromising quality, technique or materials.

Bundle and save

Doing windows, waterproofing or facade repair at the same time as siding usually saves 10–20%, because mobilisation, scaffolding and disposal costs are shared across one job instead of three.

NYC sales tax applies

New York is one of the few states where installation labour is taxable. Expect state, city and MCTD rates on top of materials and labour — we show it as a separate line so nothing is buried.

No guesswork estimates

We measure on site, note your sheathing and access conditions, and send an itemised written estimate. The number you sign is the number you pay unless we uncover hidden rot, which we photograph and price before touching it.

Ranges reflect 2026 New York City market pricing and are for planning only. Your final cost depends on measured square footage, home height, access and site conditions.

How the job runs

Six steps from first call to final walkthrough.

Siding is one of the few renovations where the parts you never see decide how long it lasts. This is the order we work in, and we do not skip steps to hit a date.

Free on-site inspection

We measure the elevations, check the existing siding and sheathing, and look at access, height and neighbouring walls.

Material & colour selection

We bring samples, explain the real trade-offs between vinyl, fiber cement, wood and aluminum, and match your block where it matters.

Written itemised estimate

Line-by-line pricing — material, labour, tear-off, disposal, trim, permits. No lump-sum mystery figures.

Permits & scheduling

We file with the NYC Department of Buildings where required, arrange scaffolding, and lock a start date.

Tear-off, repair & weather barrier

Old siding comes off, rotted sheathing gets replaced, and a code-compliant house wrap goes on before a single new panel is hung.

Install, seal & walkthrough

Panels hung to manufacturer spec so the warranty holds, all penetrations flashed and sealed, site cleaned, then we walk it with you.

Protect your home

Why and how to protect your home with functional siding.

Your siding is your home's first line of defence — against rain, wind and temperature swings — while also driving energy efficiency and curb appeal. Following proper care and maintenance is what guarantees it keeps performing. Routine inspection, checking for damage and quick repairs will extend its life by years.

Which factors cause damage to your home's siding?

Siding is built to resist weather, but some things wear it down over time. Knowing them helps you catch problems early.

Moisture

Excessive moisture from rain or snow leads to rot, mould and mildew growth, compromising the integrity of your siding and the wall behind it.

Insects and pests

Wood-boring insects and pests cause significant damage to wood siding, leading to structural problems and visible deterioration.

Impact

Hailstorms, fallen branches or accidental impact dent and crack siding materials, requiring immediate repair or replacement.

Improper installation

Poor technique or inadequate sealing leaves gaps and leaks, and stops the siding working as designed — leaving your home vulnerable.

Repair or replace?

Signs your siding needs replacing, not patching

A few cracked panels are a repair. These are the signals that patching is only buying time:

  • Panels warping, buckling or pulling away from the wall
  • Soft or spongy spots when pressed — rot behind the surface
  • Mould, mildew or bubbling paint on interior walls
  • Heating and cooling bills climbing year over year
  • Peeling wallpaper or paint inside, with no plumbing cause
  • Fading so uneven that repairs no longer colour-match
  • Repairs needed every single season

Siding maintenance that actually extends life

  • Rinse annually. A low-pressure wash removes salt, soot and mildew before they stain.
  • Inspect after storms. Look for cracked panels, lifted corners and loose trim.
  • Keep gutters clear. Overflow running down the wall is the number one cause of siding rot in NYC.
  • Trim back branches. Anything touching the wall scratches panels and holds moisture.
  • Reseal penetrations. Check caulking around vents, hose bibs, meters and lights every couple of years.
  • Fix small cracks fast. Water behind one panel becomes a sheathing replacement bill.

Credentials

Fully licensed & insured siding contractor, NYC

A&U Contractors is a fully licensed and insured siding contractor with a strong reputation in New York City and the surrounding areas. We are certified general contractors for all types of interior and exterior work, siding installation included. So if you are searching for a siding installer near me in NYC to add protective exterior work and lift the décor, you can rely on us.

Insurance you can verify

General liability and workers' compensation certificates are available on request before work starts — ask, and we send them the same day.

Permits handled for you

Like-for-like replacement often needs no DOB permit, but material changes, structural work, sidewalk sheds and Landmarks-designated districts do. We file and coordinate.

Manufacturer-spec installation

Most siding warranties are voided by incorrect fastening or spacing. We install to spec so your product warranty actually stands.

Workmanship guarantee

Beyond the manufacturer's product warranty, our labour is backed. If something we installed fails, we come back.

Areas we serve

Siding contractors across all five NYC boroughs.

We have satisfied customers for siding work in Staten Island, Queens, Brooklyn, Manhattan and the Bronx. Every borough has its own building stock — and its own siding problems.

Staten Island

Detached and semi-detached homes across Great Kills, Tottenville, New Dorp and Todt Hill — plus salt-air exposure along the shore that punishes untreated siding. Our home base.

Staten Island general contractor →

Brooklyn

Attached row houses in Bay Ridge, Bensonhurst, Sheepshead Bay and Flatbush, where scaffolding, party walls and colour-matching your neighbour's line matter as much as the panels.

Brooklyn general contractor →

Queens

Vinyl siding installation in Queens across Astoria, Flushing, Jamaica, Ridgewood and Forest Hills — including two-family homes where install windows have to work around tenants.

Queens general contractor →

Manhattan

Townhouses and mixed-use buildings where permits, landmark rules and sidewalk protection drive the schedule as much as the siding itself.

Manhattan general contractor →

The Bronx

Multi-family and detached homes in Riverdale, Throggs Neck, Pelham Bay and Morris Park, with a lot of aging aluminum siding due for replacement.

Bronx general contractor →

Not sure we cover you?

If your home is anywhere in the five boroughs or just outside, call and ask. We will tell you straight away.

Call (347) 833-5796 →

Recent projects

Our work around NYC

Exterior waterproofing project completed by A&U Contractors in New York City
Exterior protectionWaterproofing service
Full-house stucco and exterior finish repair by A&U Contractors, NYC siding contractors
Exterior finishFull-house stucco repair
Backyard driveway installation completed by A&U Contractors in Staten Island
HardscapeBackyard driveway installation
Brick retaining wall masonry work by A&U Contractors in New York City
MasonryBrick retaining wall
Damaged sidewalk repair and concrete replacement by A&U Contractors, NYC
ConcreteDamaged sidewalk repair
Complete backyard exterior restoration project by A&U Contractors in NYC
Full exteriorBackyard restoration

Client reviews

What NYC homeowners say

To choose a company, look at the ratings for top siding installers in New York City near you. A 5-star rating is desirable — but dedication and client happiness are what we actually optimise for.

★★★★★

It was really a pleasure to deal with this company. The quality of labor is superb and it was done in a timely manner without any problems or inconveniences. My only regret is that it's done and over with — I am looking forward to engaging this company for my future projects.

Irina TkachVerified Google review
★★★★★

Very delightful company to work with. Mohammad is a sincere young man that does excellent work. Above all, I was very pleased with the waterproofing and outdoor tile work he and his crew did for our terrace. He made sure it was done properly and promptly. Already recommended him to a friend.

Linda BavaroVerified Google review
★★★★★

A&U Contractors are professional and reliable. They completed the renovation on time and within budget. I would highly recommend them to anyone in need of construction services.

David M. MartinCustomer

FAQs

People also ask

Several essential questions come to mind before choosing any construction company to install siding. Here are the ones we answer most.

What will my siding installation cost?

Most NYC siding jobs run $7–$16 per square foot installed, so a typical 1,500 sq ft row house exterior in Brooklyn lands around $10,500–$24,000. The cost depends on the design of your house, the type of siding you select, the local weather exposure, tear-off, sheathing condition, scaffolding and trim work. We walk the property and give you a clear, itemised estimate before any work begins.

What time of year is ideal for siding installation on my Staten Island house?

Spring or fall is typically the ideal time for installing siding on a Staten Island house — the temperatures are mild and materials behave predictably. We install year-round, but vinyl gets brittle in deep cold, so winter jobs get scheduled around the forecast.

Can you install the siding yourself?

If you have the skills to install siding without help from contractors, you can do it. But make sure you have read the manufacturer's installation instructions and fully understand the terms of the siding warranty first — improper installation is one of the most common causes of early siding failure, and it voids most product warranties.

How long does a siding installation take?

A standard NYC row house or semi-detached home usually takes 3–7 working days. Larger detached homes, full tear-offs, or jobs that need sheathing replacement and scaffolding can run 1–3 weeks. We give you a date range in the written estimate.

Do I need a permit for siding in New York City?

Like-for-like replacement often does not require a DOB permit, but changing materials, altering structure, working in a Landmarks-designated historic district, or using a sidewalk shed or scaffold generally does. Permit fees for exterior work in NYC typically run $75–$300+. A&U handles filing and coordination as part of the job.

How long does vinyl siding last in the NYC climate?

Quality vinyl lasts 20–30 years here with almost no upkeep. Fiber cement commonly runs 40–50 years, aluminum 30–40 years, and wood 20–40 years depending on how often it is refinished.

Can new siding be installed over old siding?

Sometimes — if the existing layer is flat, dry and structurally sound. We usually recommend a full tear-off, because it lets us inspect the sheathing, replace any rot and install a proper weather-resistive barrier. Layering over hides problems that cost far more later.

Which siding is best for a home in Brooklyn or Queens?

For attached row houses on a budget, insulated vinyl gives the best cost-to-performance balance. For sun-exposed facades and owners staying long term, fiber cement holds colour and shape far better. We recommend based on your facade exposure, your block's character and how long you plan to stay.

Will new siding lower my energy bills?

Siding on its own is a weather barrier, not insulation. Pairing it with insulated panels or continuous rigid foam plus a correctly sealed house wrap is what cuts drafts and heat loss — and that is where homeowners notice the winter difference.

What are the signs I need replacement instead of repair?

Warped or buckled panels, soft spots, visible rot, mould on interior walls, climbing heating bills, peeling paint indoors, and needing a repair every season all point to replacement rather than patching.

Are you licensed and insured?

Yes. A&U Contractors is a fully licensed, bonded and insured general contractor working across all five NYC boroughs. Certificates of insurance are available on request before work begins.

Do you offer free estimates for siding in NYC?

Yes — on-site estimates are free and carry no obligation. Call (347) 833-5796 or send the form on this page, and we get back to you within one business day.

Related exterior work

Siding is usually one part of an exterior job. We handle the rest too.

Still in doubt about whom to hire for home renovation in NYC? Whether it is siding contractors for vinyl siding installation or any other exterior trade, you can call us on 347-833-5796 or email aanducontractors@gmail.com.

Get a free estimate

Ready to talk siding? Tell us about your home.

For stellar siding services, contact A&U Contractors today. Serving Staten Island, Queens, Brooklyn, Manhattan and the Bronx.

  • Free, no-obligation on-site estimate
  • Licensed, bonded & insured general contractor
  • Itemised written pricing before any work starts
  • $500 off full siding installations
  • Call direct on (347) 833-5796, Mon–Sat 9am–6pm

Request your estimate

Fill this out and we will get back to you within one business day.

Please enable JavaScript in your browser to complete this form.