Skip to main content

A&U

A&U Contractors — Header
Brick Pointing NYC | Masonry & Brick Repair Contractors
Masonry & Brick Work · All 5 NYC Boroughs

Brick Pointing & Masonry Work in NYC Done Right

Crumbling mortar, cracked bricks, or a facade violation? A&U Contractors is a licensed masonry contractor delivering expert brick pointing, brick repair, and full masonry restoration across Staten Island, Brooklyn, Queens, Manhattan & the Bronx.

15+ Years in NYC
LL11 / FISP Ready
5.0★ Google Rated

Get Your Free Masonry Quote

Tell us about your brickwork — we reply within one business day.

Please enable JavaScript in your browser to complete this form.
15+Years of Masonry
1,000+Walls Restored
5.0★Verified Reviews
FreeOn-Site Estimate
Top Brick Pointing Contractors Near You

The Best Brick Work & Masonry Work in NYC

Choosing the right brick pointing contractors NYC is a critical decision — it's what separates a repair that lasts decades from one that fails in a year. A&U Contractors is a leading, licensed and insured masonry contractor with 15+ years of hands-on work across New York City. Whether you searched for brick repair NYC or concreting contractors near me, you've found a team that pays attention to every joint and detail.

Buildings and walls with disintegrating mortar — worn down by sun, rain, wind, or impact — need brick pointing to stay sound. Older NYC brick buildings were assembled brick by brick with a mortar mix holding them together. When that mortar fails, water gets in and damage spreads. We chisel out the loose, failed mortar and refill the joints with a fresh, color-matched batch that restores both strength and appearance.

  • Licensed, bonded & insured masonry contractors
  • Color-matched mortar, including historic lime mortar
  • Local Law 11 / FISP facade work & violation removal
  • Clean, detail-focused finish on every joint
Book a Free Inspection
A&U Contractors brick pointing and masonry work in NYC
Our Masonry Services

Complete Brick & Masonry Solutions

From a single spalling brick to a full facade restoration, A&U handles every kind of masonry work in NYC.

🧱

Brick Pointing & Repointing

We cut out failed mortar joints and repoint with fresh, color-matched mortar — the core fix that stops water intrusion and restores strength.

🔨

Brick Repair & Replacement

Cracked, spalling, or missing bricks replaced with matching units so your wall looks seamless and stays structurally sound.

🏚️

Chimney Repair

Repointing, crown repair, and rebuilding for deteriorated NYC chimneys — done safely at height with the right equipment.

🪟

Lintels & Window Sills

Rusted steel lintels and worn sills replaced or restored to prevent cracks and water damage around openings.

🏢

Parapet Walls & Facade

Parapet rebuilding, stucco repair, and Local Law 11 / FISP facade restoration for buildings that need to stay compliant.

💦

Power Washing & Sealing

Facade cleaning, caulking replacement, and protective sealing that keep your brickwork looking sharp and weather-resistant.

Brick Pointing Cost in NYC

How Much Does Brick Pointing Cost in New York?

In NYC, brick repointing typically runs $12–$30 per square foot. Ground-level, low-rise work sits at the lower end; taller buildings that need scaffolding cost more. Building height, mortar type, access, and Local Law 11 compliance all shift the final number. Here are typical 2026 ranges — your free A&U inspection gives an exact quote:

Type of WorkBest ForTypical NYC Price
Repointing — low-rise / accessible1–2 story homes, ground level$12 – $18 / sq ft
Repointing — mid-rise w/ scaffoldMulti-story buildings$18 – $25 / sq ft
Single-wall / minor repairOne wall or small area$500 – $1,500
Full rowhouse repointingWhole-house facade$4,000 – $12,000+
Chimney repointingStandard residential chimney$1,000 – $3,500
Brick replacementSpalled / missing bricksQuoted on site

*2026 NYC market ranges for guidance only. Historic lime-mortar matching and high-access work may vary. Request a fixed written quote here.

Deteriorated brick mortar joints in an NYC building needing repointing
When to Repoint

Signs Your Brickwork Needs Attention

Mortar failure is easy to ignore until it becomes a structural or facade-violation problem. Catching it early keeps costs down and protects your building.

  • Crumbling or receding mortar
  • Cracks running through joints
  • Spalling or flaking brick faces
  • White efflorescence on walls
  • Loose or bulging bricks
  • Water stains inside walls
  • Gaps around lintels / sills
  • A facade (LL11 / FISP) violation
📞 Get a Same-Week Estimate
Our Simple Process

How A&U Restores Your Brickwork

Free Inspection

We assess mortar condition, access, and any facade compliance issues, then measure the scope.

Written Quote

You get a clear, fixed price with the right mortar spec — including lime matching for historic walls.

Cut & Repoint

We chisel out failed mortar, clean the joints, and repoint with fresh, color-matched mortar.

Seal & Finish

We clean the facade, seal where needed, and leave your brickwork strong and sharp-looking.

Areas We Serve

Masonry Contractors Across All 5 Boroughs

From Staten Island rowhouses to Manhattan brownstones, our masons are nearby.

More From A&U Contractors

Related Restoration Services

Brickwork often pairs with facade, stone, and outdoor masonry projects:

Brick Work FAQs

Frequently Asked Questions

How much does brick pointing cost in NYC?

Brick repointing in NYC typically costs $12–$30 per square foot — around $12–$18 for accessible low-rise work and $18–$25 for taller buildings needing scaffolding. A full rowhouse can run $4,000–$12,000+, and a chimney $1,000–$3,500. We provide a fixed written quote after a free inspection.

What's the difference between brick pointing and repointing?

They're closely related. "Pointing" refers to finishing or renewing the mortar joints on the surface; "repointing" is the full process of grinding out old, failed mortar and replacing it with fresh mortar. Both restore strength and keep water out — we do whichever your wall needs.

How long does brick repointing last?

Properly done repointing with the correct mortar can last several decades. Using a mortar that matches the original — especially lime mortar on historic buildings — is key to durability and to protecting the surrounding brick.

Do you handle Local Law 11 / FISP facade work?

Yes. Buildings over six stories fall under NYC's Facade Inspection & Safety Program (Local Law 11 / FISP). We perform the masonry repairs — repointing, brick replacement, parapet and lintel work — needed to bring facades back into compliance.

What masonry services do you offer?

Brick pointing and repointing, brick repair and replacement, chimney repair, lintel and window-sill work, parapet walls, stucco repair, power washing, caulking, stone repair, and building violation removal — across residential and commercial properties.

Which areas do you serve?

We provide brick and masonry work across all five boroughs — Manhattan, Brooklyn, Queens, Staten Island, and the Bronx — plus nearby NYC neighborhoods.

Protect Your Investment

Ready to Restore Your Brickwork?

Don't let failing mortar turn into structural damage or a facade violation. Get a free inspection from NYC's trusted masonry contractors.